|
Description |
Single
colour sealed ink cup pad printing machine
with
electro-pneumatic logic. |
|
Operation |
Push
button, foot pedal or auto cycle operation. |
|
Print
speed |
Maximum
auto cycle speed 900 printed passes
per hour (approx.) tested on dry run. |
|
Machine
set up |
Built
in logic for set up with step by step
operation for ink cup cycle and pad
operation. |
|
Ink
cup size |
Optional,
90mm, 135mm or 160 Ø diameter
ink cups available. |
|
Ink
cup type |
Aluminium
cup with screw cap refill hole. |
|
Ink
cup seal |
patented
push on reversible ceramic ring. |
|
Ink
cup travel |
maximum
print area: dependent on size of ink
cup and cliché plate used. |
| Printable
area |
Maximum
print area: dependent on size of ink
cup and cliché
plate used |
| Cliché
Plate |
5
variable (user defined) sizes of thin
steel or high quality nylon cliché
plate up to a maximum 750mm
x 250mm, with 2 punched location holes. |
| Pad
fixing |
Quick
release pad holder with magnetic x,
y, z adjustment |
|
Pad
travel |
Reciprocating
pad travel 300mm from cliché
plate to component. |
|
Pad
stroke |
Regulated
down travel of pad up to a maximum of
200mm |
| Pad
pressure |
Regulated
up to 5500 Newtons |
|
Air
supply |
Compressed
air only at Max. 6kg/cm, consuming HL200lt/min |
| Mains
supply |
240
Volt, 50Hz |
|
Width |
1000mm |
|
Height |
1900mm |
|
Depth |
1700mm
(With work table fully out) |